Technical characteristics

KAMAZ 53228 6X6 GVW 24000 KG

WEIGHTS AND LOAD CAPACITIES
Curb vehicle weight, kg
8280
Curb vehicle weight, front axle load, kg
4160
Curb vehicle weight, rear bogie load, kg
4120
Payload, kg
15720
Gross vehicle weight, kg
24000
Gross vehicle weight, front axle load, kg
6000
Gross vehicle weight, rear bogie load, kg
18000
ENGINE
Make/Model
740.51-240 (Euro-2)
Nominal power, gross, kWt (hp)
176 (240)
Maximum torque, net, Nm (kgcm) / at crankshaft rotation, rpm
912 (92) / 1100-1500
Arrangement and number of cylinders
V-type,8
Displacement, l
10,85
Cylinder diametre and piston stroke, mm
120/120
Compression ratio
16,5
Engine oil volume
10,85
FUEL SYSTEM
Fuel tank capacity, l
210 or 210+350
GEARBOX
Make/Model
152
Type
Mechanical 10 - speed
Control
Mechanic, remote
Front
10
Rear
2
Main Gear
5,43 or 5,94 or 7,22
WHEELS AND TYRES
Wheel type
pneumatical, tubed
Tyre size
11.00 R20 (300 R508)
ELECTRICS
Voltage, V
24
Storage batteries, V/Ah
2х12/190
Generator, V/wt
28/2000
CLUTCH
Make/Type
Friction, dry, two plate
Diameter
Drive
Hydraulic with pneumatic booster
FINAL DRIVE
Type
Gear ratio
5,43 / 5,94 / 7.22
CAB
Type
located above the engine with high roof
Execution
Without a berth
BRAKES
Drive
pneumatical
Drum diameter, mm
400
Brake linings width, mm
140
Brake linings total area, sq. cm
6300
GENERAL DATA
Maximum speed, not less, km/h
80
Maximum gradient, not less, %
31
Outer turning radius, m
11,3
Average fuel consumption - on road at speed 60 km/h
Average fuel consumption - on road at speed 80 km/h
Max. Fuel distance
at fuel tanks capacity

KamAZ 53228 - a car from the category of large chassis. It has three axles and a 6 by 6 wheel arrangement. Outside, this car does not stand out among other models produced by the Kama plant. Its design is quite classic. Taking into account the features of the equipment used, the truck can be used for different purposes, including for long-distance transportation.

Thanks to individual features and a leading front axle, it is possible to use this car where other cars cannot be used. The cross-country ability and relative power of this model exceed these characteristics of all other models of similar technology.

The technical characteristics of the KamAZ 53228 short log truck include a 6 by 6 wheel arrangement and high cross-country ability. Thanks to the reinforced side members and a steel frame, the model withstands high loads.

There are spring suspensions front and rear. The front suspension is equipped with leaf springs with hydraulic shock absorbers. The rear suspension has a balanced design.

Elements of its equipment are semi-elliptic springs and rocket rods with movable joints. Wheels are installed on the chassis, the tires of which have a road pattern. The rear axles have dual wheels.

Contact Us